Het hout waarmee het allemaal begon (slingerde in mijn garage) Resultaat to dusver Tijd om de uiteinden af te zagen Zo ziet het er nu uit Ik vond het nog niet stoer genoeg O nee! Mijn lamp gaat stuk. Ik wil geen kl*te discoverlichting! Situatie nu Het maken van een rond stuk plastic Voor de ophanggaten moest ik voor ieder gat vier keer boren: 4 mm, 12 mm, 16 mm en weer 12 mm Toen moesten er nog vier sleuven komen Bijna klaar! Maar twee draadjes – ik gebruik maar één kleur Tijd om de kleur van de lak te bekijken op een stuk hout dat ik heb afgezaagd (het zou kleurloos moeten zijn) Vooruit dan maar! (Later heb ik alles mee naar binnen genomen – in de garage werd het bijna minder dan vijf graden, dus te koud voor de lak) Derde en laatste keer Plaats maken voor het aluminium – de lak weghalen Lijm! Ik heb het solderen dat hierna kwam niet op video opgenomen – sorry.. Dus hier is het uiteindelijke resultaat Wat me bevalt 1. Het licht is geweldig, Heel gezellig, alleen maar naar beneden, dus nooit ‘in je gezicht’ en de juiste warme kleur. Ik ben daar heel blij mee! 🙂 2. Ik ben tevreden met het ontwerp, het is goed gelukt. Hij is heel plat voor een lamp die zo veel licht geeft (heb je gezien dat ik de ophangkabels heb kunnen gebruiken voor de stroom? Goed he? 🙂 3. De groene stripjes geven een grappig effect, waar je moeite voor moet doen om het te zien. Ik had dit vooraf niet verwacht – ik vond het wel een fraai ontwerpelement. Nu is dit effect juist het leuke van de groene strips! Wat heb ik geleerd 1. Deze lak vult de nerf van het hout compleet. Ik zou deze nooit meer gebruiken, maar liever iets van een was of olie 2. ik zou waarschijnlijk de aluminium zijkanten niet nog eens doen. Ik dacht ze nodig te hebben om een rechte kant te maken, maar achteraf waren ze niet nodig. (En ze leveren veel werk op!) 3. Deze ‘schoorstenen’ van chroom glimmen wat erg, zo naast het aluminium. Eerst had ik houten schijven gemaakt, maar ik wist niet dat de LED’s nog zo warm zouden worden, dus heb ik deze gekocht. Het zijn eigenlijk kraanrozetten. Ja, ik kan hem nu ondertekenen Bedankt voor het kijken!

A wooden LED hanging lamp – design and making
Tagged on:                                             

100 thoughts on “A wooden LED hanging lamp – design and making

  • April 15, 2017 at 11:53 pm
    Permalink

    Lovely. I commend your creativity.

    Reply
  • April 18, 2017 at 4:38 am
    Permalink

    If you commented the video it would get a lot more interesting

    Reply
  • April 19, 2017 at 1:39 pm
    Permalink

    great work man

    Reply
  • April 20, 2017 at 8:44 pm
    Permalink

    oh wow, that lighting is so nice….

    Reply
  • April 23, 2017 at 4:04 pm
    Permalink

    Please, narrate as you go. This is awful!!!

    Reply
  • April 25, 2017 at 8:46 pm
    Permalink

    Leuke video en zeker een mooie lamp. Hoe heb je de stroom via de ophang draden laten lopen want dat zou een diy project vele maken strakker maken. keep up the good work

    Reply
  • April 30, 2017 at 8:00 am
    Permalink

    Stunning!!

    Reply
  • May 1, 2017 at 1:26 pm
    Permalink

    Great Work!
    The aluminum and chrome elements make the lamp elegant and graceful .
    Leds generate far less heat than regular light bulbs. No reason for concern.
    GELUKWENS!

    Reply
  • May 2, 2017 at 6:25 pm
    Permalink

    great job.. with love from India

    Reply
  • May 3, 2017 at 9:07 pm
    Permalink

    I rate this lamp so much.. Do you see anything of the green leds in the Kelvin/colour? from switching them on and off, or it is way to low to fight with the other bulbs.?

    Reply
  • May 4, 2017 at 9:52 pm
    Permalink

    after watching the three videos youve posted thus far, I have to compliment your music selection. your videos are just so relaxing. Not to mention your magnificent craftsmanship.

    Reply
  • May 6, 2017 at 8:09 am
    Permalink

    Ruined it with the edding

    Reply
  • May 7, 2017 at 4:46 pm
    Permalink

    Dit is echt super mooi!!! vond je het niet "eng" om die schuine kanten er aan te zagen? Ooit hoop ik ook zo iets moois te kunnen maken! Ik ben al aan het oefenen. je maakt echt super mooie projecten! (ik kijk deze als laatst ik heb het project van uw tafel en de enorm vette bus eerst gekeken. :p). Ik hoop nog te genieten en ideeën op te doen van uw volgende projecten!
    Groeten van mij :p

    Reply
  • May 7, 2017 at 9:49 pm
    Permalink

    Wow this looks amazing! Could you post more information about the lights you used and how they are powered by the hanging wires?

    Reply
  • May 11, 2017 at 6:02 pm
    Permalink

    Well done I love it.

    Reply
  • May 13, 2017 at 12:00 pm
    Permalink

    WOW Work of art!

    Reply
  • May 15, 2017 at 3:36 pm
    Permalink

    Lekker!!

    Reply
  • May 16, 2017 at 6:50 am
    Permalink

    Great light all I'm saying is that stinking isn't a swear word…

    Reply
  • May 16, 2017 at 9:47 pm
    Permalink

    Hele leuke video's! Ik doe er veel inspiratie door op! Ik ben geabonneerd 🙂

    Reply
  • May 18, 2017 at 7:52 am
    Permalink

    your a goat (g.o.a.t – greatest of all time) keep up the brilliant work, also love your bus. I am inspired and am going to make one when im older!

    Reply
  • May 30, 2017 at 11:28 pm
    Permalink

    Mooi man! Trots op wezen!
    Ik moet zeggen dat ik het niet met je eens ben over je kritiek aan het eind op de 'schoorsteentjes' en het aluminium profiel. De combinatie van hout en metaal maakt het visueel veel boeiender wat mij betreft.

    Reply
  • June 1, 2017 at 2:30 pm
    Permalink

    Very nice .. I subscribed.. how did you wire the lights..? I don't see any wires from the ceiling ?

    Reply
  • June 1, 2017 at 10:13 pm
    Permalink

    V.I.P'S M.V.P'S W O W SUPER MOBIL HOME ON WHEELS A MEGA  AMAZE'IN UPCLASSY BEAUTIFULLY DESIGNED AND MADE !

    Reply
  • June 4, 2017 at 7:16 pm
    Permalink

    Are the aluminum bits intended to be decorative or to hold the lamp flat? Or both? I've been thinking of doing something like this for some custom shelves with a fairly long span.

    Reply
  • June 6, 2017 at 3:17 am
    Permalink

    lol …try to work this into the RV somewhere like over the bed maybe… get a good laugh every morning… 🙂

    Reply
  • June 8, 2017 at 4:06 am
    Permalink

    ur home must be prety great

    Reply
  • June 12, 2017 at 2:47 am
    Permalink

    that is beautiful

    Reply
  • June 23, 2017 at 2:24 am
    Permalink

    "I though it wasn't brutal enough"… LOL! 😂. Enjoyed this video a lot! Hope you make more.

    Reply
  • June 23, 2017 at 2:33 am
    Permalink

    Oh! You could use a clear matte topcoat on the shiny light "chimneys" to give them the same brushed metal matte look as the aluminum strips.

    Reply
  • June 25, 2017 at 11:01 am
    Permalink

    Very impressed, thank you for sharing with us

    Reply
  • July 3, 2017 at 9:30 am
    Permalink

    ❤❤❤❤❤❤❤❤❤❤❤❤❤❤❤❤❤❤❤❤❤❤❤❤❤

    Reply
  • July 7, 2017 at 10:44 pm
    Permalink

    Wow! I really enjoyed not only the video, but the music as well. Already subscribed and about to watch the other videos. U bent een kunstenaar.

    Reply
  • July 12, 2017 at 1:04 am
    Permalink

    Muito lindo,parabéns!

    Reply
  • July 16, 2017 at 1:41 am
    Permalink

    admiro su trabajo..

    Reply
  • July 21, 2017 at 2:56 pm
    Permalink

    nice work, you said the steel cables are used to power the lights? So when the lights are on, the steel cables have current on them?

    Reply
  • July 23, 2017 at 7:27 am
    Permalink

    I love the aluminum rails. Adds contrast to the wood and chrome. The faucet chimney pieces was a brilliant touch. Well done

    Reply
  • August 10, 2017 at 2:14 pm
    Permalink

    Nice work. We build too such a lamp. We used smart Controllers so you can change the Color, saturation and you can use your smartphone or a remote. Check it out. Your lamp looks really stylish by the way, good work!

    Reply
  • August 12, 2017 at 6:11 am
    Permalink

    I like how the hanging cables also power the lamp. How do you deal with the current passing through the exposed wire though? Are the cables in a sheath?

    Reply
  • August 15, 2017 at 2:19 am
    Permalink

    Wow, truly beautiful ❤️

    Reply
  • September 5, 2017 at 9:20 pm
    Permalink

    BRAVO maestro! BRAVO!

    Reply
  • September 9, 2017 at 12:37 pm
    Permalink

    You are an artist and I love your taste in music.

    Reply
  • September 10, 2017 at 5:43 pm
    Permalink

    You mentioned led heat. I wanted to share some experience with waterproof leds, those are meant to be in outdoor open air or submerged to keep internal heat down. I have had waterproof smd 5050 turn the silicone brown because of the heat over time. I only use non waterproof leds for indoor projects now. Great work on the lamp!

    Reply
  • September 18, 2017 at 9:04 am
    Permalink

    your work n music is sooooo great I love it😊 👍

    Reply
  • September 22, 2017 at 1:47 pm
    Permalink

    The finished product look amazing. Where did you buy the lamps?

    Reply
  • September 24, 2017 at 4:36 pm
    Permalink

    Beautiful

    Reply
  • September 27, 2017 at 9:30 am
    Permalink

    Very cool downlighter…love it. Thanks ☠️🎸👍☠️

    Reply
  • September 28, 2017 at 6:48 pm
    Permalink

    You have a great talent, please do more incredible things like this…

    Reply
  • September 30, 2017 at 3:49 pm
    Permalink

    Nice… but use a wider angle lens next time maybe…

    Reply
  • October 16, 2017 at 7:17 pm
    Permalink

    Great. Greetings from Germany.

    Reply
  • October 23, 2017 at 12:23 pm
    Permalink

    wow ! i've a question , did you use heat sinks to counter heat from g4's ?

    Reply
  • October 24, 2017 at 10:48 pm
    Permalink

    Where did you buy the led lights? how did you power them from the ceiling? Thanks

    Reply
  • October 27, 2017 at 5:13 am
    Permalink

    AMAZINGGGGGGG WAHOOO

    Reply
  • October 27, 2017 at 1:56 pm
    Permalink

    Really great design. I also love the music on the video.

    Reply
  • November 1, 2017 at 2:30 pm
    Permalink

    I hope its DC power going down the cables. LOL

    Reply
  • November 11, 2017 at 4:54 pm
    Permalink

    Awesome work..

    Reply
  • December 1, 2017 at 6:55 am
    Permalink

    So you used the electricity wire to hang it on.?
    Superb jobs anyway. I will stay tuned on your channel.

    Reply
  • December 9, 2017 at 3:46 am
    Permalink

    Thıs ıs pure art

    Reply
  • December 14, 2017 at 4:24 pm
    Permalink

    Rustigggggg

    Reply
  • December 19, 2017 at 11:03 am
    Permalink

    What LED's is that? Are they flat or how are they mounted? Or are you using spots? And what is that "grill" on top? It feels like something is missing, but I love the lamp 🙂

    Reply
  • January 1, 2018 at 3:55 pm
    Permalink

    Good design….!!!

    Reply
  • January 16, 2018 at 5:51 pm
    Permalink

    great vid and music

    Reply
  • January 26, 2018 at 3:14 am
    Permalink

    nice project sir.. and a gorgeous woman there.. 😁

    Reply
  • January 28, 2018 at 1:25 pm
    Permalink

    I from India and I love the work and the idea it's great and a lovely wonderful work art with wood and lights

    Reply
  • February 21, 2018 at 12:41 am
    Permalink

    Purple. Purple please

    Reply
  • February 27, 2018 at 3:31 pm
    Permalink

    good skill with wood and nice music choice 😉

    Reply
  • March 16, 2018 at 1:25 pm
    Permalink

    Gorgeous. Well done!

    Reply
  • March 16, 2018 at 11:30 pm
    Permalink

    I like the "not brutal enough" part..lol. Great project and sure an inspiration for me.

    Reply
  • April 5, 2018 at 10:06 pm
    Permalink

    Can u do a video about the Rv
    Please

    Reply
  • April 13, 2018 at 11:31 am
    Permalink

    Bhootnike , you are saying DIY means do it yourself, and the machines you used will your father bought us ?

    Reply
  • May 21, 2018 at 1:53 pm
    Permalink

    Music also used in oddsey

    Reply
  • June 17, 2018 at 6:07 pm
    Permalink

    So beautiful!!! PERFECTION!

    Reply
  • July 1, 2018 at 1:55 pm
    Permalink

    Well, I also want to build my own lamp. But I don't have the tools. So that means instead of putting just a slit into the wood I have to make 10 smaller wood plates. And 5 pieces of multicolor adressable led strips. Then I have to Programm the effects.

    So would you suggest using the cheapest wood for the first one, after all I never have build furniture?

    The only good thing is that I can check the electric wiring to German standards on my own.
    (Mostly for insurance reasons)

    Reply
  • July 2, 2018 at 11:06 pm
    Permalink

    Beatiful work. Really beautiful. Subscribed.

    Reply
  • July 15, 2018 at 3:57 am
    Permalink

    I am not impressed

    Reply
  • July 23, 2018 at 11:28 pm
    Permalink

    Lindo trabalho parabéns

    Reply
  • August 4, 2018 at 7:58 am
    Permalink

    U should do more projects

    Reply
  • August 30, 2018 at 3:49 pm
    Permalink

    Just came across the video – yes I am the analogue generation, recently discovered YouTube. I agree with Dave Kimball below. Aluminium strips look great. Can only repeat the great comments below. Superb. Can only inspire people to have a go – me included. Thanks

    Reply
  • October 8, 2018 at 4:58 am
    Permalink

    How does it get power?

    Reply
  • October 31, 2018 at 3:16 am
    Permalink

    Really cool

    Reply
  • December 19, 2018 at 4:12 am
    Permalink

    Spends countless hours building, then whips out a sharpie to scribble on it and screw it all up.

    Reply
  • December 21, 2018 at 1:11 am
    Permalink

    Onrust this is very inspiring. Wondering how did you manage to hang it from your ceiling. There must be some sort of half a ball or something similar where you put your transformer and where steel wires are attached. Wheredid you get that? Thanks.

    Reply
  • January 24, 2019 at 11:45 am
    Permalink

    beautiful

    Reply
  • January 27, 2019 at 11:24 pm
    Permalink

    GREAT! FAVOLOUS. I would likek now what kind spotlight 2,5 Watt 12 volt G4 LEDs is it and where was bougth. Thank you.

    Reply
  • February 18, 2019 at 7:47 pm
    Permalink

    At last – a decent video with decent music

    Reply
  • February 28, 2019 at 10:03 pm
    Permalink

    Привет!

    Reply
  • February 28, 2019 at 11:48 pm
    Permalink

    Snap, I have exactly the same router.

    Reply
  • March 30, 2019 at 8:36 pm
    Permalink

    Отлично!

    Reply
  • March 30, 2019 at 8:37 pm
    Permalink

    Подписка!

    Reply
  • March 30, 2019 at 8:37 pm
    Permalink

    Так держать

    Reply
  • March 31, 2019 at 2:06 pm
    Permalink

    I really liked the background music

    Reply
  • June 22, 2019 at 5:38 am
    Permalink

    An absolute stunning piece! Would have loved to see the complete process where you fit the lamps and the other fixtures.

    Reply
  • July 20, 2019 at 9:40 am
    Permalink

    Just great….

    Reply
  • August 12, 2019 at 7:23 am
    Permalink

    I want to leave but stuck with this music

    Reply
  • August 15, 2019 at 10:41 am
    Permalink

    Great music choices, love it. Your work is excellent too.

    Reply
  • August 24, 2019 at 4:16 pm
    Permalink

    Heerlijk weinig commentaar en veel muziek 👏👏👏👏

    Reply

Leave a Reply

Your email address will not be published. Required fields are marked *