Hi friends,welcome to RR FASHION POINT Today in this video i will share brand new neck design with front slit. it is very easy to make . for perfect cutting and stitching of this neckline please watch video till the end. friends if you still don’t subscribe my channel please subscribe my channel and hit bell icon for latest fashion updates. so let’s start to make pattern. i have already cut the kurti /shirt. in front part i have to make slit so this is open side with half inch seam allowance see this is for seam allowance and i have marked on it mark for neckline (width ,length) in my measurement it is 3” x 5” i have marked same on paper. now see how to mark for pattern. first from round shape we will mark on 8” the pattern that will make the strip is 1” wide so mark on 1” for this then mark for second strip it is also 1” wide so mark on the gap of 1” as same shaped. and third strip is also marking as same. in this pattern i will use these 3 strips. marking has been done. now to cut it. and separate these strips. watch carefully how to cut the strips to the fabric. first cut and separate these. now cut strips on fabric one by one. i have to cut these . when we cut it on fabric keep seam allowance in length and width as shown see this is first strip with seam allowance second and third strips are cutting like this do not cut the inside shape keep fabric as shown and cut only outside with seam allowance in third strip also do not cut inside only cut outside with seam allowance. strips have been cut and these are double folded. we will cut same for second half of front part. set these strips on neckline as shown in this pattern i will use loops so we have to mark for it. cut the double folded strips from center so it make easy to sew. for loops we take thin cord and which i have already prepared . attach double loops on marking point. and fix with rough stitch. cut the extra loops if there is. then set the another half of strip which we have to cut and stitch as L shape as shown. after stitching fold it outside as shown. see loops are fixed on strip. and now also stitch rest of strips same as. these 3 strips are half of front pattern and ready another 3 strips for second half of front pattern. before attaching it first you should iron it. i initially cut the strip with 1” gap so now we have to set them with 1” gap. now fix it with rough stitch. i have cut the front neckline (3” x 5”) i have also mark on which is for seam allowance set the first strip on 8”. and fix it to neckline with rough stitch. cut the extra fabric . take 2” wide strip for slit put it under the kurti and stitch for slit. ready both sides like this for slit. double fold the strip and stitch on edge of slit. our both part of front side are ready. now overlap the one slit to another as shown and stitch it to close the slit. here leave the open slit about 2 buttons (if you want) close the slit with stitch to edge. if you want open slit from bottom leave upto 15” to open it. double stitch here and complete it. front part of kurti is ready now stitch along with back side. now on whole round neck i will use piping for this i have cut bias tape stitch it to whole round neck. in this pattern you will also use binding or round collar neck after stitch bias tape double fold it for piping friends my brand new neck design is ready now. please visit my channel for latest neck designs. if you like my this design please give 1 like and 1 comment thank you watching for this video.